EATON 9395XR UPS
The Eaton 9395XR UPS is a complete modular data centre solution that combines unprecedented efficiency and reliability with an eye-catching, space-saving design. This three-phase UPS is scalable in 125kW hot-swappable power modules and can expand vertically up to 20 x 125kW and horizontally up to 8 units, delivering megawatts of power in an industry-leading compact footprint — 1.5MW in just 1.44m². Lithium-ion compatible and equipped with full SiC MOSFET modules, it achieves up to 99% efficiency in Energy Saver System (ESS) mode and above 97% in double conversion, dramatically reducing power and cooling OPEX. With a 7″ colour touchscreen, EnergyAware capability and MTTR as low as 5 minutes, the 9395XR is the perfect white or grey space solution for today’s data centre.
- Power Module : 125 kW UPM (hot-swappable)
- Frame Offering : 1500 / 1800 / 2500 kW
- Configuration : Modular, three-phase
- Efficiency (ESS mode) : Up to 99%
- Efficiency (double conversion) : > 97%
- Parallel Capability : 4 x parallel, maximum 6 MW
- Cold Start : Supported
- Soft Start : Rectifier ramp-up, generator compatible, configurable ramp rate
- Input Voltage : 380 / 400 / 415 V
- Input Voltage Range : 301–478 V L-L, 175–276 V L-N
- Input Frequency Range : 50 / 60 Hz
- Input Power Factor : > 0.99
- Input Current Distortion : < 3% @ 100% load
- Battery Type : Lithium, VRLA, Ni-Cad
- Charging Method : BMS, ABM or constant float charge
- Battery Voltage : 400 – 690 Vdc
- Battery Connection : Common battery supported
- Output Voltage : 380 / 400 / 415 V, 4-wire or 3-wire
- Output Frequency Range : 50 / 60 Hz
- Output Regulation : ±1% steady state
- Voltage THD : < 1% (linear load), < 3% (non-linear load)
- Overload : 125% for 10 minutes
- Display : 7″ colour LCD touchscreen with green/yellow/red LED light bars
- Communication : Built-in USB (device & host), 5 alarm inputs + EPO, alarm relay output, 3 connectivity slots
- Certification : IEC 62040-1 (Safety), IEC 62040-2 (EMC), IEC 62040-3 (Performance), CE
- UPM Dimensions (H×D×W) : 174 × 600 × 598 mm
- UPM Weight : 55 kg
- Frame Dimensions (H×D×W) mm : 1500kW — 2069 × 865(rear)/1100(top) × 1600; 1800kW — 2069 × 865/1100 × 2400; 2500kW — 2069 × 1100 × 3200
- 99% efficiency with Energy Saver System (ESS) and above 97% in double-conversion mode
- Full SiC MOSFET power modules with oil-filled capacitors for enhanced efficiency and reliability
- Vertical expansion up to 20 x 125kW and horizontal expansion up to 8 units
- Industry-leading compact footprint — 1.5MW in only 1.44m², over 1MW per square metre, half the footprint of 93PR
- 125kW hot-swappable power modules can be inserted or removed while the UPS is running for uninterrupted service
- On-line replaceable UPM with MTTR as low as 5 minutes
- Lithium-ion compatible with 10-year performance warranty and 15-year design life, plus multiple Lithium-ion BMS support
- EnergyAware upgrade enables demand charge management, time-of-use optimisation, demand response, frequency regulation and aggregation services
- Internal redundancy design conserves valuable data centre floor space
- Flexible top and rear exhaust options — can be placed against a wall with top exhaust
- Top and bottom cable entry available
- DC start controls available in each power module
- Redundancy and speed-controllable fans for optimised cooling
- 7″ colour touchscreen tracks energy savings, battery time, outage history and load profiling
- Green/yellow/red LED light bars make system status visible from a distance
- Remote access via HTTP(S), SNMP, MODBUS TCP/IP, Modbus RTU and BACnet IP
- Integrates with VMware®, Citrix® and Microsoft® via Intelligent Power Manager®
- PredictPulse™ remote monitoring provides 24×7 real-time monitoring and alerts
- TCO recovered in around 3 years through ESS/double-conversion energy savings
Technical support is available to you in the event of a problem with your UPS
Technical Help Desk
- line: 9311661130
- Email: [email protected]
